If the GC2 Device Appears to Display Inaccurate Data

If the GC2 Device Appears to Display Inaccurate Data

  1. Confirm that the device is fully opened and the foot/latch is properly positioned underneath.

  2. Confirm the device is placed on the same level surface as the ball.

  3. (If applicable) Confirm that the protective shield (accessory) is properly attached and not obstructing the cameras or ball-lock window.

  4. (If applicable) When connected to a Windows computer running Foresight Sports FR1 or FSX software, confirm that "wait for spin" is enabled under the data selection settings.

    • Related Articles

    • How to Report Incorrect or Inaccurate Data

      Seeing numbers that look off, short, or just wrong? Before you report an issue, run through the quick checks below. Most “bad numbers” come down to unit settings or environment/setup; not hardware. Step 1: Verify Unit Settings Many reports of “off ...

    • GCQuad (GCQ) - Reporting Incorrect or Inaccurate Data

      Our GC2+HMT, GC3 (Launch Pro), GCQuad and GCHawk launch monitors use a series of sophisticated cameras to capture and track the ball and club marker (fiducials) placed on the club face. Issue: Device is reporting incorrect launch and/or club data and ...

    • Reporting Incorrect Data ( GC2 - GCQuad - GCHawk )

      You’ve probably done a bit of testing indoors with the GC2 and have thoroughly analyzed your data, however: Are you using the GC2 by itself or with simulation software? Be sure to test without the software, removing the simulated environment as a ...

    • Carry Appears Incorrect in Software but Correct on GC2 Device

      NOTICE: Before you dive into this problem, please be sure to update your Original FSX Software to the most recent version: Click HERE Be sure to bookmark this page for future reference: https://www.foresightsports.com/drivers-downloads If you do not ...

    • E6 - Foresight Device Not Sending Data

      If you are confident your device is operational then the issue may be related to your setup and settings. 1. When you launch your E6 Integration be sure that you have first connected the Device within the Foresight Sports Launcher app: First, Select ...