FR1
Clubhead Speed/Smash Factor in FR1 Software
In regards to the Clubhead Speed and Smash Factor, this is not measured by the GC2 device alone. Club Data is only measured by our GCQuad or with the HMT (Head Measurement Technology) attachment. Without that additional hardware the GC2 only measures ...
Reset Resolution In the FR1 (FSS) Legacy Software
To reset the resolution in the FR1 software you must open a command prompt and access the windows system registry. Follow the instructions below: From the windows start menu, search (or run depending on the windows version) "Regedit". From the left ...
Retrieving Saved Data with Legacy FR1 Software
Depending on the nature of the data, there are several file types (and locations) that can be saved within the simulation software: Club fitting data: Club fitting data can be saved at the bottom of the SHOT ANALYSIS screen by selecting the "SAVE ...
FR1 In-Game Hot Keys
Key Stroke Action Left Arrow Aim Left Right Arrow Aim Right Q Raise above landscape A Return to course elevation GAME MODE A Display gap fitting results FITTING MODE Left Shift Kneel to see break G Toggle grid F8 Screen capture (image) R Record ...
FR1 Multiplayer Game Play
NOTE: Multiple Player is only an option for normal Game Play only; it is NOT an option for “PRACTICE” or “FITTING” mode. To select a second player in game play mode, double-click on the player name in the right menu. Player will appear on the left ...
Computer Requirements for Legacy FR1 Software (Version 1.3 and above)
Desktop System Operating System: Windows 7 (64 bit or greater) Memory: 4Gb RAM or greater Processor: 2.4 Ghz or greater (Recommended: i5 Series) Video Card: 2GB of memory with memory bandwidth per second > 75 GB/sec; (Recommended: Nvidia 750Ti or ...
Legacy FR1 Software installation (Existing Users)
NOTE: If you are experiencing issues with running your Foresight Sports Simulation Software, please confirm that the computer meets the MINIMUM SPECIFICATIONS indicated in the "Computer Requirements" in this section BEFORE attempting to reload your ...
If Software Image is White When in Game Mode
From the MAIN MENU, go to the OPTIONS MENU at the top of the screen. Enter the password "fss01011" to gain access and go to the graphics menu. Set the BRIGHTNESS to 0.81 and the CONTRAST to 1.40. SAVE the applied settings and restart the game. The ...
If On-Screen Image is not Filling the Entire Screen
The projected image may not fill your screen if the resolution is set incorrectly. To correct this: Right-click on the desktop and find “Screen resolution”. Select the projector from the options offered and change the resolution. NOTE: Make sure that ...
If a Blank Screen is Displayed During Game Start-Up
Confirm that the computer is properly connected to the monitor and/or projector. Foresight Sports recommends using the same connection-type (such as DVI) if connecting to two monitors or a projector. Once you've confirmed that the monitor and/or ...
If You Encounter a Projector or Monitor Error Message
With FR1 Software NOT running, confirm that the computer is recognizing the projector and/or monitor in the screen resolution screen, accessible by right clicking the desktop. If not, please refer to the “blank screen during game startup" area of ...
Legacy FR1 Software Runs Slowly or Skips
Confirm that your Windows computer meets the minimum SYSTEM REQUIREMENTS stated above. Confirm that no other software is running while attempting to run the FR1 software, as this may slow performance. If the computer meets the proper system ...
Configuring the Simulator Setup Tool
In this guide, you will learn how to configure your simulator setup tool. This tool adjusts the software's 3D environment, matching it closely to your physical environment, which allows for a seamless experience. To open your simulator setup tool, ...