GC2 - Solid Green Light & Nothing Visible On Display
If your GC2 device is powering on with a Solid Green Light but nothing is being displayed it may be caused by one of the following issues:
1. The GC2 display itself has a loose connection. To test this follow the steps below:
- Push up through the holes in the bottom of the GC2 Housing, upward towards the adjustable LCD Display.
- Move the Display up and down to see if you have any response on the LCD itself. If so, this would indicate the LCD cable connection is loose, or the display itself is damaged.
2. The CPU Board within the device is experiencing an issue.
- The Solid Green light is usually an indication that the CPU Board, which controls the GC2 device, has failed and will need to be repaired or replaced. This requires the device to be returned to Foresight Sports.
If the issue is not resolvable please contact Foresight Sports Technical Support by emailing support@foresightsports.ca
Related Articles
GCQ Stuck On Lock *Solid Green Light
The device is stuck on ball lock with a solid green light 1. Step into the way of the cameras, entirely blocking the view of the ball and tee 2. Wait a moment and then move out of the way to allow the camera to lock again. 3. Move the ball and the ...
No Image/Display From The PC, Monitor, and/or Projector
Confirm that the computer is properly connected to the monitor and/or projector. Foresight Sports recommends using the same connection type (such as HDMI to HDMI) if connecting to two monitors or a projector and a monitor. If using adapters make sure ...
GCHawk - No Longer Locking onto Ball with Green or Blue LED light
Problem: The GCHawk has stopped locking onto the ball in the software (FSX Pro, FSX 2020, FSX Play, Foresight Fairgrounds) despite producing a blue or green LED light. Resolution: Something went wrong with the existing calibration files, and the ...
GCHawk Power Light - Indicator Light Colors ( Red Light / Blue Light / Yellow Light )
Determining If The GCHawk Is Powered On If you are having issues connecting the GCHawk, or missing shots, gaining ball lock, or seeing a flashing/solid light that you are no used to seeing: Use this table to determine the power state for the GCHawk ...
Understanding GC2 Ball Lock and Light Indicators
The on-screen ball placement aid is only displayed when the device is looking for a ball (the "ball-lock" indicator light will be flashing red). The ball must be placed within the right or left hitting zone (indicated by the trapezoids) for ball lock ...