GC2 LCD Brightness

GC2 LCD Brightness

If you GC2 display appears too dim you may need to adjust the brightness.

 

1.   Please take the GC2 device and hold down the Power button for 6 seconds to perform a hard restart.  

 

2.   From there, hold down the Brightness and Contrast button (little button in the bottom RH corner of the device that looks like sunshine) and press the Power button once.  Continue to hold the Brightness button until you see a solid green light on the GC2 device then let go of the button.  

 

3.   Use the Up and Down arrow buttons on the GC2 device multiple times to see if that will adjust the brightness and contrast of the LCD backlight screen to get the LCD screen to come back on.

 

If that does not resolve: 

 

1.   Power off then power on the GC2 device, then unplug the GC2 from all cables and remove any protective covering.

 

2.   Find the two holes in the bottom of the GC2 device and push up into those holes with your fingers.  This should lift the LCD  screen up and you can move it up and down to +/- 30 degrees.  

 

3.   Note, when moving this screen up and down, do you get any change in what shows up on the screen? if the display appears to be changing when you perform this movement it indicates that the display itself is damaged or the cable connecting the display to the CPU of the device may be damaged, causing the issue.

 

The GC2 device may be returned for repair diagnosis to resolve the display issue.  Otherwise the GC2 will still continue to read shots independently of this LCD issue and you can continue using.

    • Related Articles

    • GC2 LCD - Displaying Solid Verticle Line

      There are a few items that can be causing this: 1. The device needs to be powered by the AC Adapter. This vertical line may be indicative of a dead battery or the device loosing power. Powering from the AC adapter will allow you to verify this ...

    • GC Product Network Trouble Shooting

      This guide is to assist with trouble shooting network issues from a device stand point. The network is required for the following: Subscriptions Device Registration Device Validation Purchased Feature Add-ons Region Confirmations Should you have an ...

    • GC Hawk Security Key

      The GC Hawk uses a security key instead of a password. The security key is 'FSSPORTS'.

    • GC Quad Pin Code

      The GC Quad uses a pin code instead of a password. The pin code is 'FSSPORTS'.

    • Resolve a Choppy Swing Camera Video - How To Adjust A Low Frame Rate Due To Brightness On Camera Settings

      Problem: The swing camera video appears to be choppy. Explanation: The frame rate may be operating at a low setting, causing this to occur. The possible frame rate can be impacted by environmental settings such as brightness and image quality. ...