The GCQ Barometer In Relationship To Original FSX, FSX 2018, FSX 2020 Data
To start with, the Quad will create a data packet for each shot. This data is unaffected by any outside influences and is purely the measured data (in relationship to the algorithm if applicable to the data type).
Then the data can be adjusted base off of the air pressure setting in the GCQ settings window. The options available are: Sea Level (or 0), 2500ft, 5000ft, 10,000ft. The data packet will remain unaltered when sending to FSX unless the option to use the barometer is selected.
- This means that your GCQuad device may be producing data, assumed at SeaLevel and presenting this information on the device as well as one the FSX Software
- This may also mean the GCQuad may be producing data that is different than the presented data in the FSX software, unless the Barometer option within FSX had been selected.
Related Articles
GCQuad Barometer Settings
The GCQuad by itself has the ability to make Carry Distance adjustments based on Barometric Pressure, Temperature, and Estimated Altitude measured directly through the GCQ. To do this, please do the following: Open the FSX software by selecting and ...
Original FSX - GCQuad USB Connection Connecting But Not Sending Data In Software
Before you get to far along, the information below is for older versions of the Original FSX Software. We recommend you update to the latest version of the Original FSX Software before proceeding. Once updated be sure to test to see if you problem ...
Original FSX Product Support Page - System Resources, Manuals, and How to Use.
Foresight Sports has offered comprehensive online resources to our customers to understand how to use their Original FSX Software. Be sure to review the Original FSX Product Support Page online to find all related items. This page will include user ...
GCQuad Barometer Settings
The GCQuad by itself has the ability to make Carry Distance adjustments based on Barometric Pressure, Temperature, and Estimated Altitude measured directly through the GCQ. To do this, please do the following: Open the FSX software by selecting and ...
Reporting Incorrect Data ( GC2 - GCQuad - GCHawk )
You’ve probably done a bit of testing indoors with the GC2 and have thoroughly analyzed your data, however: Are you using the GC2 by itself or with simulation software? Be sure to test without the software, removing the simulated environment as a ...