The GC2 Does Not Display Some (or Any) Ball Flight Information
Test the device with a new flash module (or one you are certain is functioning). This will help determine if the flash module is the true cause of the issue.
If the flash module is working correctly, please see "Ball Finding & Missed Shots" below.
To purchase additional flash modules, please contact Foresight Sports Technical Support.
Related Articles
Ball Flight From Bottom of Screen - White Flashon Screen
The Twitch/Flash is from the camera looking down at the ball during the initial flight. You can see how the ball starts from the bottom of the screen rather than from the point of impact, causing this issue for you. Check the room config. You can ...
GCHawk - No Longer Locking onto Ball with Green or Blue LED light
Problem: The GCHawk has stopped locking onto the ball in the software (FSX Pro, FSX 2020, FSX Play, Foresight Fairgrounds) despite producing a blue or green LED light. Resolution: Something went wrong with the existing calibration files, and the ...
Why Is My Device Having Ball Lock Issues?
Ball Lock issues occur when your Foresight Sports launch monitor struggles to correctly identify the golf ball inside the capture zone / hitting zone. Your device must clearly see the entire circumference of the ball, with less than 1 mm of movement, ...
What Ball Data The GC3 Can Produce
What Ball Data The GC3 Can Produce After hitting the ball, the GC3 records your speed, launch angle, push/pull, spin, and carry. To see how this data is visualized on screen, please click the link below. GC3 User Manual - What The GC3 Can Do
No Image/Display From The PC, Monitor, and/or Projector
Confirm that the computer is properly connected to the monitor and/or projector. Foresight Sports recommends using the same connection type (such as HDMI to HDMI) if connecting to two monitors or a projector and a monitor. If using adapters make sure ...