QuadMAX (QMAX) Adjusting hardware Barometer (Air Pressure)
To adjust the QM Barometer follow the steps below.
- Press the menu button (3 lines stacked) to access the Main Menu
- On Page 1 tap "Settings"
- Within Settings on the bottom right is "AIR PRESSURE"
- Tap Air Pressure will change the air pressure
- AUTO
- SEA LEVEL
- 2500 FT
- 5000 FT
- 10000 FT
Related Articles
GCQuad & QuadMax: Enable APIPA via HDT
This article explains how to enable APIPA (Automatic Private IP Addressing) on a GCQuad or QuadMax using the Hardware Diagnostic Tool (HDT). APIPA is commonly used when troubleshooting direct Ethernet connections between the device and a PC, ...
GCQuad or QuadMax Randomly Restarting While Connected? Disable DMON
This article explains how to disable DMON (DHCP Monitor) on a GCQuad or QuadMax using the Hardware Diagnostic Tool (HDT). If your GCQuad or QuadMax randomly restarts, reboots, or disconnects while connected to Foresight Sports software, the device ...
GCQuad Barometer Settings
The GCQuad by itself has the ability to make Carry Distance adjustments based on Barometric Pressure, Temperature, and Estimated Altitude measured directly through the GCQ. To do this, please do the following: Open the FSX software by selecting and ...
QuadMAX Miss Shots, Incorrect Data, etc. - How to Save Diagnostic Shots for Review
The QMAX device will operate out of the box with accuracy. However, there are instances where users might feel that their device is not working as expected. WHEN TO USE THE SAVE SHOT DATA FEATURE: Should you experience one of the following please ...
Hardware Connection - Bluetooth
Hardware Connection – Bluetooth - Pairing Foresight Sports Launch Monitor and Mobile Device Are Not Pairing GC2 or GCQuad (GC3/GCHawk not supported) is not pairing/connecting to Mobile Phone, Tablet, etc. with Bluetooth Issue: Foresight Sports Launch ...