QuadMAX Firmware Update

QuadMAX Firmware Update

To update your QMAX Firmware please follow the steps below:

 

1. Locate the QMAX Firmware on the QMAX Support Page

2. Download and Run the QMAX Firmware Installation File

3. Power On and Connect your QMAX using the USB-C Cable provided with the product

4. Select to Update the Firmware once prompted by the application.

5. Be sure to wait for the entire process to complete. This may restart your QMAX automatically. Once complete you will see a CLOSE option on the application window.

    • Related Articles

    • How to Update Firmware on GCQuad or QuadMAX

      Keeping your GCQuad or QuadMAX up to date ensures the best performance and compatibility with Foresight Sports software. Firmware updates often resolve known issues, improve shot capture, and add new features. Note: Windows PC required - Not ...

    • GCQuad & QuadMax: Enable APIPA via HDT

      This article explains how to enable APIPA (Automatic Private IP Addressing) on a GCQuad or QuadMax using the Hardware Diagnostic Tool (HDT). APIPA is commonly used when troubleshooting direct Ethernet connections between the device and a PC, ...

    • GCQuad or QuadMax Randomly Restarting While Connected? Disable DMON

      This article explains how to disable DMON (DHCP Monitor) on a GCQuad or QuadMax using the Hardware Diagnostic Tool (HDT). If your GCQuad or QuadMax randomly restarts, reboots, or disconnects while connected to Foresight Sports software, the device ...

    • How To Update Your ForeCaddy Firmware

      How To Update Your ForeCaddy Firmware   In order to update the firmware for your ForeCaddy, please follow the steps listed in the guide below: ForeCaddy Updates Guide

    • How to Update GCHawk (GCH) Firmware

      To update your GCHawk Firmware please follow the steps below: 1. Locate the GCHawk Firmware Tool on the GCHawk Drivers and Downloads Page 2. Download and Run the GCHawk Firmware Installation File and open up the file once it has download fully. 3. ...