How to Register and Validate Your Foresight Sports Device (45-Day Validation Period)

How to Register and Validate Your Foresight Sports Device (45-Day Validation Period)

All Foresight Sports launch monitors must register and validate with our servers to unlock and maintain their full features.

Every 45 days, your device must connect to our servers to refresh its validation. If this step is missed, your device will go into restricted mode until validation is completed.

What Happens if Validation Expires

If your device goes past 45 days without validating:

  • Wireless connectivity to software (Wi-Fi / Bluetooth) will be disabled

  • Club data will be limited to 1-dot mode only

  • Features recently purchased (like Club Mode) or region unlocks will not activate until validation occurs

Once your device successfully validates again, full functionality is restored immediately.

When You Need Validation

Validation is required when:

  • Registering a new device for the first time

  • Every 45 days (to maintain access)

  • After purchasing or enabling features (e.g. Club Mode)

  • After a region unlock is applied

  • After subscription or license changes

How to Validate Your Device

You can validate through any of these methods (internet required):

Option 1: Foresight App (Recommended for Ground Devices)

For GC3, GC3s, Launch Pro, Launch Pro Indoors, GCQuad, and QuadMAX only

  1. Install the Foresight App on your iOS or Android device.

  2. Connect your launch monitor to the app via Bluetooth.

  3. The app will automatically ping our server and apply validation.

Option 2: FSX 2020

Works with all devices

Ground devices: connect via USB or direct Ethernet

Overhead devices (GCHawk, Falcon): connect via Ethernet only

  1. Launch FSX 2020 on your PC.

  2. Connect your device.

  3. FSX will validate your device with the server.

Option 3: FSX Play

Works with all devices

Ground devices: connect via USB or direct Ethernet

Overhead devices (GCHawk, Falcon): connect via Ethernet only

  1. Launch FSX Play.

  2. Connect your device.

  3. FSX Play will complete validation automatically.

Option 4: FSX Pro (PC)

Works with all devices

Ground devices: connect via USB or direct Ethernet

Overhead devices (GCHawk, Falcon): connect via Ethernet only

  1. Open FSX Pro (PC).

  2. Connect your device.

  3. Validation will occur in the background when FSX Pro communicates with our server.

Option 5: Hardware Diagnostic Tool

Works with all devices via USB

  1. Download and install the Hardware Diagnostic Tool from the Foresight Support site.

  2. Connect your device via USB.

  3. Use the tool to manually ping our server and force validation.

Option 6: Direct Modem Ethernet Connection (Last-Ditch Validation)

If standard validation methods fail, a direct modem connection can help bypass network restrictions such as firewall rules or router-level filtering.

Steps:

  1. Power the device completely off.

  2. Locate an available Ethernet port on your internet modem (not the router).

  3. Connect an Ethernet cable from the modem directly to the device.

  4. Power the device on.

  5. Allow the device time to communicate with Foresight Sports servers.

  6. Registration and validation should complete automatically.

This method is intended as a troubleshooting fallback and is not required for normal operation.

Important Notes

  • Overhead devices such as Falcon and GCHawk are always validated through active software or Ethernet connections and do not support mobile app validation.

  • Validation requires an active internet connection.

  • Routers, firewalls, and managed networks can sometimes block validation traffic.

FAQs

Q: Why is validation required every 45 days?
This ensures your device stays in sync with our servers, applies any entitlement changes, and verifies licensing.

Q: What happens if my device goes into restricted mode?
You’ll lose wireless software connections and club data will be reduced to 1-dot mode. Re-validate to restore full functionality.

Q: Does validation erase my data?
No. Validation only updates licensing and entitlements.

Q: Can I use a mobile hotspot to validate?
Yes. As long as the hotspot has internet access and can reach Foresight servers, validation will work. If the hotspot uses the same ISP as your blocked network, the same issue may occur.

Q: My device won’t validate; what should I do?
Try a different network or hotspot. If issues continue, review our Fix: Product Network Connection Issues - Internet and Validation Errors article

    • Related Articles

    • E6 - Foresight Device Not Sending Data

      If you are confident your device is operational then the issue may be related to your setup and settings. 1. When you launch your E6 Integration be sure that you have first connected the Device within the Foresight Sports Launcher app: First, Select ...

    • Why Is My Device Missing Shots?

      If your Foresight Sports device appears to “miss shots,” this is often caused by hitting mat setup or usage, rather than a device fault. Below are steps to identify and correct the issue. Step 1: Check Mat Placement Ensure the hitting mat is firmly ...

    • Device Won’t Turn On? Try These Steps

      If your launch monitor does not power on or start up normally, it may be experiencing a power delivery issue, failed boot sequence, or internal hardware fault. Follow the steps below to determine whether the issue can be resolved or if the device ...

    • Microsoft Edge Blocks Foresight Sports Downloads Solution

      In this article, you will learn how to allow a download to complete when it is blocked by the Microsoft Internet Explorer or Edge browsers. When downloading Foresight Sports installation files for firmware, courses, or software, some browsers will ...

    • Validation Failure or Internet Error Message Related to Comcast / Xfinity

      Customers having issues with Comcast/Xfinity not allowing their Activation Emails through or for FSX to validate/activate please adjust the settings below: 1. Log into xfinity.com/myxfi 2. Click "More" at the top 3. Disable XFi advanced security ...