GCQ Temperature Range

GCQ Temperature Range

We would recommend to not use in freezing conditions as this has been know to cause constriction within electronic boards, causing partial failure. We would expect the same thing to happen at an extremely high temperature as well. 

However, The recorded temperature range is:

  • 14 Degrees Fahrenheit to 113 Degrees Fahrenheit.
  • Negative 10 degrees Celsius to 45 Degrees Celsius

    • Related Articles

    • GCQ Battery - No Power To Device or Not Charging

      If you are experiencing problems powering on or charging your GCQuad device please see the steps below: 1. Confirm the device is getting power from the power supply. The GCQuad power supply will have a green light on the power brick that will light ...

    • What Temperature Can The GC2 Operate At?

      GC2 Operating Temperature Range: Between 32F to 131F ambient  (0 to 55C) The internal temp of the GC2 is is 10F greater than ambient temperature. Failure happens at around 160F internal (Published: PM - Nov 11, 2013)   GC2 NOT WORKING DUE TO COLD ...

    • GCQ Backlight Issue

      Below are some trouble shooting steps that may help to return your GCQ Backlight to working order: Restart the unit and see if the issue persists. Press a few of the other keys on the keyboard a few times and then try the backlight again. Let the ...

    • GCQuad Barometer Settings

      The GCQuad by itself has the ability to make Carry Distance adjustments based on Barometric Pressure, Temperature, and Estimated Altitude measured directly through the GCQ. To do this, please do the following: Open the FSX software by selecting and ...

    • GCQuad Barometer Settings

      The GCQuad by itself has the ability to make Carry Distance adjustments based on Barometric Pressure, Temperature, and Estimated Altitude measured directly through the GCQ. To do this, please do the following: Open the FSX software by selecting and ...