GC3 Error Code: M Type

GC3 Error Code: M Type

GC3 Error Code: M Type
  • This may be represented by an M01, M02, M04, M05 and so forth.
  • The M Type error parameters have not been set yet. This type of error should not exist and does not represent any issue with the product in its current release.
 
If your GC3 is presenting an error code it could indicate one of the following:
1. Upon startup a hardware component on your device was initiated outside of a set tolerance.
2. Upon startup a hardware component on your device was indicated to have failed and requires repairs.
3. Upon startup a aspect of your specific environment is interfering with the hardware on your device.
 
 
To attempt to resolve this please attempt the following in order:
1. Power off the device and unplug the power supply. Wait 1 minute, then plug the power supply into the device and power on the device once more. Repeat this step 2-3 times if needed to confirm the process was given opportunity to resolve the issue.
 
2. Update your devices firmware. To do this please visit the GC3 Product Support Page and follow the GC3 Firmware Update Guide.
 
3. If the issue continues please submit a Support Request from the GC3 Product Support Page.

    • Related Articles

    • GC3 Error Code: B Type

      GC3 Error Code: B Type This may be represented by an B01, B02, B04, B05 and so forth. The B Type error indicates a problem loading the GC3 Operating System correctly. This is most likely because of a hardware issue with the product. However, be sure ...

    • GC3 Error Code: D Type

      GC3 Error Code: D Type This may be represented by an D01, D02, D04, D05 and so forth. The D Type error indicates a problem communicating with a GC3 Auto Leveling correctly. This would indicate a hardware failure has occurred. However, be sure to ...

    • GC3 Error Code: H Type

      GC3 Error Code: H Type This may be represented by an H01, H02, H04, H05 and so forth. The H Type error indicates a problem with Ball Tracker function of the device. This error is most likely due to a bug within the software running the device. Be ...

    • GC3 Error Code: G Type

      GC3 Error Code: G Type This may be represented by an G01, G02, G04, G05 and so forth. The G Type error indicates a problem with GC3 Ball Launch processing as it relates to hardware and firmware processing. This error is most likely due to a bug ...

    • GC3 Error Code: A Type

      GC3 Error Code: A Type This may be represented by an A01, A02, A04, A05 and so forth. The A Type error indicates a problem loading the GC3 System Files correctly. This issue is potentially related to a bug with the software running the product. ...