GC3 Error Code: C Type
This may be represented by an C01, C02, C04, C05 and so forth.
The C Type error indicates a problem communicating with a GC3 Image Sensor correctly.
This issue is most likely due to a camera failure with the product. However, be sure to follow the steps below to attempt to resolve the issue.
If your GC3 is presenting an error code it could indicate one of the following:
1. Upon startup a hardware component on your device was initiated outside of a set tolerance.
2. Upon startup a hardware component on your device was indicated to have failed and requires repairs.
3. Upon startup a aspect of your specific environment is interfering with the hardware on your device.
To attempt to resolve this please attempt the following in order:
1. Power off the device and unplug the power supply. Wait 1 minute, then plug the power supply into the device and power on the device once more. Repeat this step 2-3 times if needed to confirm the process was given opportunity to resolve the issue.
2. Update your devices firmware. To do this please visit the
GC3 Product Support Page and follow the GC3 Firmware Update Guide.