Forecaddy - Reload the Assignment of the Remote Control to the ForeCaddy Cart
To reload the assignment of the Remote Control to the ForeCaddy cart you should do the following:
NOTICE: Your Remote should buzz slightly when connected correctly, indicating it is seen by your computer. If this does not occur please attempt this process with a different cable, or have the remote charge for an hour and try once more.
1. Install and Launch the latest ForeCaddy Firmware Tool
2. Enter the entire SN and the Version Number, based upon the release notated on the Cart or Remote (V1, V2, Ect). Then follow the version assignment with the Full SN Thread listed on the Remote Control of on your ForeCaddy Cart Sticker:
a. Remote SN Identification:
b. The Firmware Tool (note: Enter the entire string as shown below. If Technical Support Asks, the actual SN of the Cart is the last five digits, as highlighted below)
3. Select OK, and then proceed to the Operations menu. Select, the Update Remote Option, and Confirm. If you have not connected the remote to the computer using the Firmware Upgrade Tool you will not be able to continue until doing so).
4. Select the Match ID option from the bottom Left of the menu. If this does not occur please attempt to repeat these steps. The entire Match Process should take a minute or two to complete.
Related Articles
Fixing An Unrecognized ForeCaddy Firmware Upgrade Tool
Fixing An Unrecognized ForeCaddy Firmware Upgrade Tool When launching the ForeCaddy Updater it is possible to run into the issue of the Firmware Upgrade Tool not being recognized. This is not related to a faulty Firmware Upgrade Tool, but a missing ...Forecaddy Foot Pedal Replacement - Field Replacement
If you feel comfortable with using basic hand tools and have 30 minutes to complete the repair, we have created a guide to assist you in the replacement of the Forecaddy foot pedal. If you do not feel comfortable please ...How To Update Your ForeCaddy Firmware
How To Update Your ForeCaddy Firmware In order to update the firmware for your ForeCaddy, please follow the steps listed in the guide below: ForeCaddy Updates GuideFSX LIVE: Releasing A License / Deactivating Courses For Reuse
In order to review and control your active Foresight Sports Software Licenses you must follow the instructions below. This will allow you access to control FSX PLAY, FSX PRO (iPad & Computer) FSX 2020, FSX 2018, Original FSX, Zombie Golf, and Golf ...Keystone Corner Correction Settings Eiki Projectors
If the projector is not storing the Keystone corner correction settings after a power cycle do the following. Use the provided remote and go to the settings menu Make sure that the "Standby Mode" is set to "Normal" Make sure the "Keystone" is set to ...